Long-Term Rust-Proof Black Color 2 Rails Steel Tubular Fencing
Product Description
Brief introduction of Long-Term Rust-Proof Black Color 2 Rails
Steel Tubular Fencing:
Long-Term Rust-Proof Black Color 2 Rails Steel Tubular Fencing is a great solution when you need high protection fencing without
giving the appearance of entrapment or imprisonment. Increasingly
popular, wrought iron fence will add value to your property,while offering a very high level of
protection.
Long-Term Rust-Proof Black Color 2 Rails Steel Tubular Fencing provide added protection from invaders attempting to climb over
your fence.Long-Term Rust-Proof Black Color 2 Rails Steel Tubular Fencing prevent anyone trying to gain access by cutting a part of the
fence.
Long-Term Rust-Proof Black Color 2 Rails Steel Tubular Fencing are manufactured using the industry’s highest-strength rails.
Pickets feature "true" sizing, and feature full galvanization,
without unprotected seams. The picket shape within the
high-strength rails prevent rattle or removal, and allow for
racking of 48" per 8-foot panel - equal to or greater than any
comparable fence product.
Typical applications for Long-Term Rust-Proof Black Color 2 Rails Steel Tubular Fencing:
1. Technology Parks
2. High-voltage switchyards and sub-stations
3. Rail-corridors
4. Protecting critical assets
5. Airports
6. Sea ports
Characters of Long-Term Rust-Proof Black Color 2 Rails Steel Tubular Fencing :
Horizontal pipe, vertical pipe and column three parts are different
specifications of the steel tube, two layers anticorrosive
processing, good anti-corrosion performance, service life is long,
after electrostatic spraying, can amount to 15 years, and to save
the cost product maintenance updates.
Specification of Long-Term Rust-Proof Black Color 2 Rails Steel Tubular Fencing :
| Panel Height | 2100mm(standard) |
| Panel Configuration | Vertical pickets are inserted through punched rails with each
picket welded at the top and bottom, of both the top and bottom
rails. |
| Picket profile | 25*25*1.2mm Square Hollow Section(SHS). |
| Picket spacing | 140mm centre-to-centre of each vertical picket. |
| Picket top profile | Crimped(round) spear top. |
| Rails | 40*40*1.6mmSHS. |
| Panel brackets | 1-piece heavy duty,hot dipped galvanised security bracket(for
brackets per panel). |
| Fasteners | Tamper proof Irius Tek screws |
| Intermediate posts | 65*65*2.5mm post(3000mm long) |
| Gate frame | Stiles and Rails 65*65*1.6mm SHS(three horizontal rails) |
| Gate locking hardware | Heavy duty ∅20mm slide-bolt with Broadhurst Lockbox,The slide-bolt
is lockable in both the open and closed positions. Heavy duty ∅16mm slide-bolt (pad lockable). Perforated mesh welded to the outside of the gate preventing the
gate hardware being used as climbing points. |
| Gate hinging | Greasable tapered roller bearing(bottom) and sealed ball bearing
hinging(top) With ability to swing 180°. |
| Gate posts | 100*100*4mm(3000mm long) for openings up to 3000mm. 150*150*5mm(3000mm long) for openings greater than 3000mm. |
| Post cap | Steel caps(powder coated) |
| Weld type | All welds are Silicon bronze which has superior corrosion
resistance to a standard mild steel weld. |
| Zinc coating | Pre-galvanised precision tube with a zinc coating mass of
275g/m²across the internal and external surfaces of the hollow
steel tube. |
| Higher corrosion environments | We would recommend the use of our zinc-rich epoxy primer under the
top coat to give much greater corrosion resistance. |
| Post footing | Fence posts ∅300mm*900mm deep using 20mpa concrete Gate posts ∅450mm*900mm deep using 20mpa concrete |
